Good Business Isn't Just Good for Us: Toll Processing That Wins for You and the Environment
A lot of business is treated like a tug-of-war, one side wins only if the other loses. The best kind of business isn't like that at all. When it's done right, the same deal is good for us, good for our customer, and good for the environment at the same time. Nobody has to lose for it to work.
That's the idea behind toll processing at EPL Plastics. It's one of the clearest examples we know of a deal where everyone at the table comes out ahead.
With toll processing, you keep your material and we do the work. You send us your post-industrial plastic waste, the scrap, trim, purgings, and off-spec runs from your production, and we grind, densify, blend, and pelletize it into clean, consistent regrind or pellets you can feed straight back into manufacturing.
There's no capital outlay on your end. You don't buy grinders, densifiers, or pelletizers, and you don't hire people to run them. You use ours. It's a turnkey service built around your volumes and schedule.
This is where most of the value lands, and it should. Toll processing lets you reclaim the material you already paid for instead of throwing it away.
- You stop paying to dispose of it. Waste that used to head to landfill, with all the tipping and hauling fees attached, gets recovered instead (here's what landfill actually costs you).
- You get usable material back. The regrind or pellets come back spec-ready, so you can blend them into production and lean less on expensive virgin resin.
- You skip the capital investment. No equipment to buy, maintain, or staff. You get the output without the overhead.
Put together, that often turns a line item that used to be pure cost into a real margin gain.
We'll be honest, this is good for our business too, and that's the point. Toll processing keeps our equipment running on clean, well-understood material and builds long-term relationships with manufacturers who come back because the arrangement keeps paying off. We'd rather earn a customer for a decade by making them money than win once by squeezing them. A deal that only works for one side doesn't last, and we're not interested in the kind that doesn't.
Every tonne we process is a tonne that doesn't go to landfill or an incinerator. Reusing existing plastic also takes far less energy than making new resin from scratch, up to 70% less in many cases (TradePro), which means lower emissions and less demand for virgin petrochemicals.
This is what a circular model looks like in practice: material stays in use instead of being made once and buried. The environmental win isn't a side effect bolted on for good PR, it's baked into how the process works.
You don't have to take any of this on faith. Our Plastic Savings Calculator lets you enter how much plastic waste you generate and estimate what you're currently spending to get rid of it, and what you could save by recovering it instead. It's the quickest way to see whether the win-win-win adds up for your operation, before you talk to anyone.
Good business doesn't ask you to choose between your bottom line and doing the right thing. Toll processing lets you cut costs, reclaim material, and shrink your environmental footprint in a single move, and it lets us build the kind of steady, repeat relationships we're after.
Run your numbers on the Plastic Savings Calculator, then talk to EPL Plastics about putting your plastic waste back to work.
Q: What is plastic toll processing?
A: You keep ownership of your plastic waste and EPL Plastics processes it for you, grinding, densifying, blending, and pelletizing your scrap into clean regrind or pellets you can reuse in production, without buying any equipment yourself.
Q: How does toll processing save my business money?
A: It cuts the disposal fees you pay to landfill waste and gives you usable recycled material back, so you rely less on costly virgin resin. For many manufacturers it turns a disposal cost into a net gain.
Q: How is it good for the environment?
A: It keeps plastic out of landfill and uses far less energy than producing new virgin resin, up to about 70% less, which lowers emissions and supports a circular economy.
Q: How do I find out what I could save?
A: Use our Plastic Savings Calculator to estimate your current disposal costs and potential savings, then contact EPL Plastics for exact numbers on your material.
Q: Where does EPL Plastics offer toll processing?
A: We're based in Brantford, Ontario and provide toll processing and industrial plastic recycling to manufacturers across Canada and the northern United States.
That's the idea behind toll processing at EPL Plastics. It's one of the clearest examples we know of a deal where everyone at the table comes out ahead.
First, What Toll Processing Actually Is
With toll processing, you keep your material and we do the work. You send us your post-industrial plastic waste, the scrap, trim, purgings, and off-spec runs from your production, and we grind, densify, blend, and pelletize it into clean, consistent regrind or pellets you can feed straight back into manufacturing.
There's no capital outlay on your end. You don't buy grinders, densifiers, or pelletizers, and you don't hire people to run them. You use ours. It's a turnkey service built around your volumes and schedule.
Good for You, the Customer
This is where most of the value lands, and it should. Toll processing lets you reclaim the material you already paid for instead of throwing it away.
- You stop paying to dispose of it. Waste that used to head to landfill, with all the tipping and hauling fees attached, gets recovered instead (here's what landfill actually costs you).
- You get usable material back. The regrind or pellets come back spec-ready, so you can blend them into production and lean less on expensive virgin resin.
- You skip the capital investment. No equipment to buy, maintain, or staff. You get the output without the overhead.
Put together, that often turns a line item that used to be pure cost into a real margin gain.
Good for Us
We'll be honest, this is good for our business too, and that's the point. Toll processing keeps our equipment running on clean, well-understood material and builds long-term relationships with manufacturers who come back because the arrangement keeps paying off. We'd rather earn a customer for a decade by making them money than win once by squeezing them. A deal that only works for one side doesn't last, and we're not interested in the kind that doesn't.
Good for the Environment
Every tonne we process is a tonne that doesn't go to landfill or an incinerator. Reusing existing plastic also takes far less energy than making new resin from scratch, up to 70% less in many cases (TradePro), which means lower emissions and less demand for virgin petrochemicals.
This is what a circular model looks like in practice: material stays in use instead of being made once and buried. The environmental win isn't a side effect bolted on for good PR, it's baked into how the process works.
See the Numbers Before You Commit
You don't have to take any of this on faith. Our Plastic Savings Calculator lets you enter how much plastic waste you generate and estimate what you're currently spending to get rid of it, and what you could save by recovering it instead. It's the quickest way to see whether the win-win-win adds up for your operation, before you talk to anyone.
Take Action: A Deal Worth Making
Good business doesn't ask you to choose between your bottom line and doing the right thing. Toll processing lets you cut costs, reclaim material, and shrink your environmental footprint in a single move, and it lets us build the kind of steady, repeat relationships we're after.
Run your numbers on the Plastic Savings Calculator, then talk to EPL Plastics about putting your plastic waste back to work.
FAQ: Toll Processing and Win-Win Recycling
Q: What is plastic toll processing?
A: You keep ownership of your plastic waste and EPL Plastics processes it for you, grinding, densifying, blending, and pelletizing your scrap into clean regrind or pellets you can reuse in production, without buying any equipment yourself.
Q: How does toll processing save my business money?
A: It cuts the disposal fees you pay to landfill waste and gives you usable recycled material back, so you rely less on costly virgin resin. For many manufacturers it turns a disposal cost into a net gain.
Q: How is it good for the environment?
A: It keeps plastic out of landfill and uses far less energy than producing new virgin resin, up to about 70% less, which lowers emissions and supports a circular economy.
Q: How do I find out what I could save?
A: Use our Plastic Savings Calculator to estimate your current disposal costs and potential savings, then contact EPL Plastics for exact numbers on your material.
Q: Where does EPL Plastics offer toll processing?
A: We're based in Brantford, Ontario and provide toll processing and industrial plastic recycling to manufacturers across Canada and the northern United States.